| |
Bertram31.com General Bulletin Board
Re: What did I do?
Posted By: bob fioresi In Response To: What did I do? (Carl)
Date: Sunday, 17 April 2005, at 7:44 p.m.
Hi. I haD A BEAUTIFUL 3/4 " fibreeglas over wood floor that i thought was soft in one corner so after owning the boat for 6 years i said one spring i think i'll look at that soft spot, so i started by taking the floor up , actually ripping the sh.. out of it at THE OTHER END of thew soft spot and when i got to the soft spot , whiich was in the corner of the rear starboard side, the only problem was 2 screws let loose, and of course i had a big pile of good floor outside the boat, and a bilge filed with about a 1/4" of curse words, so i kind of know what your going through. Well underneath became another project. I peplcced all the floor supports with 5/4" by 4" or 6" mahogeny and west system glass process. I then called cabrerra and his floor was for 31's with diesel engines or i was confused . I called Richard Kidd at bertram and bought his floor. The only part problem i had was in the stern, the floor has a drop "gutter" that i had to cut abd fit but it was not a big problem I believe you can se the floor on this site under Bertram or call rich kidd at Bertram. I have a 62 expres and it fit in good . Don't remember how much it cost, but i think about 3,500.00 plus 50. freight to LI NY. I think i got it in 2001 or 02 . hop[e this helps. I'm happy with it.
| |
Bertram31.com General Bulletin Board is maintained by Patrick McCrary with WebBBS 5.12.