Bertram31.com General Bulletin Board

Re: Bow Light Socket

Posted By: Walter Kaprielian
Date: Sunday, 17 April 2005, at 9:20 a.m.

In Response To: Bow Light Socket (Tommy)

My bow lights have a flat circular disk on the top of the plug in which the bulb twist locks in. Over the years I've replaced them many times. Pull the whole piece out, cut the wires and the replacement is a fairly standard one. Once and a while I've used one with an oval plate, but they fit in the space. I liberally tef-gel the connection and clear silicone the plug and the red/green plastic covers into place before sealing with the top piece. Take your old one with you. It should be fairly standard. Hope this helps

Messages In This Thread

Bow Light Socket
Tommy -- Sunday, 17 April 2005, at 9:07 a.m.

Re: Bow Light Socket
Walter Kaprielian -- Sunday, 17 April 2005, at 9:20 a.m.

Re: Bow Light Socket
Vic Roy -- Sunday, 17 April 2005, at 12:51 p.m.

Re: Bow Light Socket
bob fioresi -- Sunday, 17 April 2005, at 8:02 p.m.

Re: Bow Light Socket
Vic Roy -- Sunday, 17 April 2005, at 8:19 p.m.

Re: Bow Light Socket
Tommy -- Sunday, 17 April 2005, at 9:17 p.m.

Re: Bow Light Socket
brucedoan -- Monday, 18 April 2005, at 8:06 a.m.

Re: Bow Light Socket
Capt Patrick McCrary -- Monday, 18 April 2005, at 6:53 a.m.

Re: Bow Light Socket
Tommy -- Monday, 18 April 2005, at 9:42 a.m.