Bertram31.com General Bulletin Board

rib de-lamination

Posted By: Ray Belanger (Reel Crazy)
Date: Monday, 4 April 2005, at 9:38 p.m.

Hi all I have a 72 Bahia Mar . iwas working in v berth building overhead cabs. Found loose screws in berth deck tightened some replaced some. Found edlamination on rib under v berth am grinding out loose tabbing . i was wondering if polyester resin is good enough to make repairs or I should use west system epoxy. loose tabbing is only about 18" from top on port side down towars centerline. Any responses appreciated. Thanks Ray

Messages In This Thread

rib de-lamination
Ray Belanger (Reel Crazy) -- Monday, 4 April 2005, at 9:38 p.m.

Re: rib de-lamination
Ray Belanger (Reel Crazy) -- Monday, 4 April 2005, at 9:59 p.m.

Re: rib de-lamination
Chiles -- Tuesday, 5 April 2005, at 5:29 p.m.

Re: rib de-lamination
Charlie Haws -- Tuesday, 5 April 2005, at 7:50 p.m.

Re: rib de-lamination
Capt. Dave Kosh -- Wednesday, 6 April 2005, at 11:05 a.m.