Bertram31.com General Bulletin Board

Re: prop rotations

Posted By: Capt. Dave Kosh
Date: Sunday, 3 April 2005, at 4:28 p.m.

In Response To: prop rotations (Scott D.)

Scott,

1) Just remember ,port=left=left hand rotation
2) Replace your cutlass bearings
3) Use Tefgel on the shafts when replacing your props. Check them for tighness after the first run to make sure. Always putting the small nut on first then the large nut in that order. Dave K

Messages In This Thread

prop rotations
Scott D. -- Sunday, 3 April 2005, at 2:46 p.m.

Re: prop rotations
Capt. Dave Kosh -- Sunday, 3 April 2005, at 4:28 p.m.

Re: prop rotations
Scott D. -- Monday, 4 April 2005, at 6:37 p.m.

Re: prop rotations
Paul Haggett -- Tuesday, 5 April 2005, at 6:24 a.m.

Re: prop rotations
Tony Meola -- Tuesday, 5 April 2005, at 10:00 p.m.

Re: prop rotations
Paul Haggett -- Monday, 4 April 2005, at 6:41 a.m.

Re: prop rotations
Scott Deskins -- Tuesday, 5 April 2005, at 9:03 a.m.