Bertram31.com General Bulletin Board

Re: NMEA 0183 and devices

Posted By: Chiles
Date: Monday, 28 March 2005, at 9:25 a.m.

In Response To: Re: NMEA 0183 and devices (bruce)

OK, here is my approach.

I'm using the output of the Furuno 1733c (White and Blue) to connect to a weather protected terminal block. From there, I am feeding the input of the ICOM 602, and the Flo-Scan. I had plenty of shielded wire left over from the Furuno hardware. Since I have a duplicate setup on the lower (except with the GPS Plotter) helm, I will do the same below. Redundant and simple, no more then two NMEA devices per outpu for me.

Chiles

Messages In This Thread

NMEA 0183 and devices
Chiles -- Sunday, 27 March 2005, at 4:23 p.m.

Re: NMEA 0183 and devices
Harv -- Sunday, 27 March 2005, at 7:24 p.m.

Re: NMEA 0183 and devices
JP -- Sunday, 27 March 2005, at 8:28 p.m.

Re: NMEA 0183 and devices
bruce -- Monday, 28 March 2005, at 7:29 a.m.

Re: NMEA 0183 and devices
Chiles -- Monday, 28 March 2005, at 9:25 a.m.