Bertram31.com General Bulletin Board

Re: NMEA 0183 and devices

Posted By: bruce
Date: Monday, 28 March 2005, at 7:29 a.m.

In Response To: Re: NMEA 0183 and devices (JP)

For clean data processing, I would limit the number of devices piggy backed to 5 or 6 on each output.

Use shielded wire and ground shield.

The best way is to solder connections, but a small terminal strip will work fine.
Keep connections dry.

Make sure any rf signal transmitters are properly bonded and grounded as required by the manufacturer.

Messages In This Thread

NMEA 0183 and devices
Chiles -- Sunday, 27 March 2005, at 4:23 p.m.

Re: NMEA 0183 and devices
Harv -- Sunday, 27 March 2005, at 7:24 p.m.

Re: NMEA 0183 and devices
JP -- Sunday, 27 March 2005, at 8:28 p.m.

Re: NMEA 0183 and devices
bruce -- Monday, 28 March 2005, at 7:29 a.m.

Re: NMEA 0183 and devices
Chiles -- Monday, 28 March 2005, at 9:25 a.m.