Bertram31.com General Bulletin Board

Re: Attaching interior teak trim

Posted By: Preston Burrows
Date: Wednesday, 9 March 2005, at 4:26 p.m.

In Response To: Re: Attaching interior teak trim (Capt. Dave Kosh)

Another option for the larger pieces,such as the 'fiddles' etc on any counter/flat surfaces' edges is to use small hardwood dowels instead of screws to fasten them in place - you could either through drill the trim pieces and use plugs to cover the dowels installation or drill in from the trim pieces underside,install the dowels [using a good waterproof glue] and use no plugs at all.

Might be an option also on other trim pieces depending on their thickness.

Clear silicone,or any other non permanent adhesive sealant,could be used to 'spot' tab the trim pieces in place in addition to the dowels.

1398

Messages In This Thread

Attaching interior teak trim
John F. -- Tuesday, 8 March 2005, at 1:28 p.m.

Re: Attaching interior teak trim
Capt. Dave Kosh -- Tuesday, 8 March 2005, at 3:10 p.m.

Re: Attaching interior teak trim
Walter Kaprielian -- Tuesday, 8 March 2005, at 4:35 p.m.

Re: Attaching interior teak trim
Rawleigh -- Tuesday, 8 March 2005, at 4:53 p.m.

Re: Attaching interior teak trim
Capt. Dave Kosh -- Tuesday, 8 March 2005, at 4:53 p.m.

Re: Attaching interior teak trim
Preston Burrows -- Wednesday, 9 March 2005, at 4:26 p.m.

Re: Attaching interior teak trim
Capt. Dave Kosh -- Wednesday, 9 March 2005, at 5:37 p.m.

Re: Attaching interior teak trim
John F. -- Thursday, 10 March 2005, at 8:42 a.m.

Re: Attaching interior teak trim
Capt Patrick McCrary -- Thursday, 10 March 2005, at 4:51 p.m.

Re: Attaching interior teak trim
John F. -- Thursday, 10 March 2005, at 7:27 p.m.

Re: Attaching interior teak trim
Capt Patrick McCrary -- Friday, 11 March 2005, at 1:19 a.m.

Re: Attaching interior teak trim
John F. -- Friday, 11 March 2005, at 7:18 a.m.

Re: Attaching interior teak trim
Capt. Dave Kosh -- Friday, 11 March 2005, at 10:43 a.m.

Re: Attaching interior teak trim
John F. -- Friday, 11 March 2005, at 1:19 p.m.