Bertram31.com General Bulletin Board

Re: Diesel fuel pick-up tube

Posted By: bruce
Date: Friday, 4 March 2005, at 8:23 p.m.

In Response To: Re: Diesel fuel pick-up tube (Capt. Dave Kosh)

Remember if your tank is aluminum, do not put brass fittings direct to the tank. Use stainless steel between the aluminum and brass.
The pickup tube should be metal and type a cg fuel hose with the red strip is fine for diesel.

If your pulling each engine from its own tube 3/8 or 1/2 is required.

If both engines are pulling from the same pickup, then you want to use 5/8 or 3/4.

Messages In This Thread

Diesel fuel pick-up tube
Jim Kilbane -- Friday, 4 March 2005, at 12:51 p.m.

Re: Diesel fuel pick-up tube
CMP -- Friday, 4 March 2005, at 1:29 p.m.

Re: Diesel fuel pick-up tube
bruce doan -- Friday, 4 March 2005, at 2:38 p.m.

Re: Diesel fuel pick-up tube
Capt. Dave Kosh -- Friday, 4 March 2005, at 6:23 p.m.

Re: Diesel fuel pick-up tube
bruce -- Friday, 4 March 2005, at 8:23 p.m.

Re: Diesel fuel pick-up tube
Jim Kilbane -- Saturday, 5 March 2005, at 9:38 p.m.

Re: Diesel fuel pick-up tube
bruce doan -- Monday, 7 March 2005, at 10:51 a.m.

Re: Diesel fuel pick-up tube
bruce doan -- Monday, 7 March 2005, at 11:05 a.m.

Re: Diesel fuel pick-up tube
Vic Roy -- Monday, 7 March 2005, at 5:05 p.m.