Bertram31.com General Bulletin Board

Re: Diesel fuel pick-up tube

Posted By: bruce doan
Date: Friday, 4 March 2005, at 2:38 p.m.

In Response To: Diesel fuel pick-up tube (Jim Kilbane)

They[the two pick-up ends, if factory style] should reach down as far as the factory pick-ups. The ends should be cut at a slight angle, not horizontally. This is to ensure no cavitation [air and fuel mixed] of the fuel at the pick-up end as the motors pull fuel and the tank is extremely low with fuel.

Messages In This Thread

Diesel fuel pick-up tube
Jim Kilbane -- Friday, 4 March 2005, at 12:51 p.m.

Re: Diesel fuel pick-up tube
CMP -- Friday, 4 March 2005, at 1:29 p.m.

Re: Diesel fuel pick-up tube
bruce doan -- Friday, 4 March 2005, at 2:38 p.m.

Re: Diesel fuel pick-up tube
Capt. Dave Kosh -- Friday, 4 March 2005, at 6:23 p.m.

Re: Diesel fuel pick-up tube
bruce -- Friday, 4 March 2005, at 8:23 p.m.

Re: Diesel fuel pick-up tube
Jim Kilbane -- Saturday, 5 March 2005, at 9:38 p.m.

Re: Diesel fuel pick-up tube
bruce doan -- Monday, 7 March 2005, at 10:51 a.m.

Re: Diesel fuel pick-up tube
bruce doan -- Monday, 7 March 2005, at 11:05 a.m.

Re: Diesel fuel pick-up tube
Vic Roy -- Monday, 7 March 2005, at 5:05 p.m.