Bertram31.com General Bulletin Board

Sintra PVC Board Question

Posted By: Capt. Dave Kosh
Date: Thursday, 3 March 2005, at 9:57 a.m.

Hello Faithful,

As me and myself do a little re do on the Can Do It, I went to a plastic store yesterday and looked at some Sintra PVC board. I'd like to use it for the overhead headliner in the salon and head. ACME Plastics guy says the stuff is mildly UV resistant but not Uncle Vic resistant. All puns aside should I paint it with 545 Awlgrip or another good primer and leave it at that. Or should I just leave it unpainted as it is in a protected area with tinted side windows only. I have no rear windows and no forward window , all fiberglass. I will be using white 1/8", should be fine. Only $25 per 4 X 8 sheet. Dave K

Messages In This Thread

Sintra PVC Board Question
Capt. Dave Kosh -- Thursday, 3 March 2005, at 9:57 a.m.

Re: Sintra PVC Board Question
Chiles -- Thursday, 3 March 2005, at 11:15 a.m.

Re: Sintra PVC Board Question
Capt. Dave Kosh -- Thursday, 3 March 2005, at 11:30 a.m.

Re: Sintra PVC Board Question
Jerry Gomber -- Thursday, 3 March 2005, at 11:47 a.m.

Re: Sintra PVC Board Question
Capt. Dave Kosh -- Thursday, 3 March 2005, at 4:29 p.m.

Re: Sintra PVC Board Question
Jerry Gomber -- Friday, 4 March 2005, at 8:57 a.m.

Re: Sintra PVC Board Question
Capt. Dave Kosh -- Friday, 4 March 2005, at 6:30 p.m.