Bertram31.com General Bulletin Board

Re: question for "Da Judge"

Posted By: Trey Dibrell
Date: Tuesday, 15 February 2005, at 11:10 a.m.

In Response To: question for "Da Judge" (Matt)

Matt--

I foamed my B25 back in the early 80's. There is no bilge in my boat except for the area where the head valves are, and area under the engines. Those areas connect via two pieces of PVC pipe running down each side of the keel, with the drains in the well area connected to them. It is much too involved to fully describe in an email, feel free to call me and I will talk you through it. I did the same for Mitch a couple of years ago. I have a print showing where to cut all of the holes to pour the foam in.

Hm--409 737 4100
Wk--409 766 2406

Messages In This Thread

question for "Da Judge"
Matt -- Monday, 14 February 2005, at 12:09 p.m.

Re: question for "Da Judge"
Terry -- Monday, 14 February 2005, at 12:44 p.m.

Re: question for "Da Judge"
CMP -- Monday, 14 February 2005, at 1:51 p.m.

Re: question for "Da Judge"
Trey Dibrell -- Tuesday, 15 February 2005, at 11:10 a.m.

Re: question for "Da Judge"
Mitch -- Wednesday, 16 February 2005, at 7:50 a.m.