Bertram31.com General Bulletin Board

Re: Sealing existing backer plates with epoxy

Posted By: Capt Patrick McCrary
Date: Tuesday, 18 January 2005, at 7:25 a.m.

In Response To: Sealing existing backer plates with epoxy (Sean Burlingham)

Sean,

Messing around trying to save rotted wood is like shoveling crap against the tide or leaking into the wind...

If there is even the slightest amount of moisture, epoxy can't penetrate of stick. Bite the bullet at the next convenient opportunity and replace them with either starboard or PVC Foam Board. Use 3M 5200 for the bedding.

Best regards,

Patrick

Messages In This Thread

Sealing Plywood with Epoxy
John F. -- Monday, 17 January 2005, at 1:35 p.m.

Re: Sealing Plywood with Epoxy
Capt. Dave Kosh -- Monday, 17 January 2005, at 3:59 p.m.

Re: Sealing Plywood with Epoxy
Rawleigh -- Monday, 17 January 2005, at 4:46 p.m.

Sealing existing backer plates with epoxy
Sean Burlingham -- Monday, 17 January 2005, at 8:57 p.m.

Re: Sealing existing backer plates with epoxy
Capt Patrick McCrary -- Tuesday, 18 January 2005, at 7:25 a.m.

Re: Sealing existing backer plates with epoxy
captdana -- Tuesday, 18 January 2005, at 8:55 a.m.

Re: Sealing existing backer plates with epoxy
Capt Patrick McCrary -- Tuesday, 18 January 2005, at 2:32 p.m.

Re: Sealing existing backer plates with epoxy
Scott Traenkle -- Tuesday, 18 January 2005, at 4:48 p.m.

Re: Sealing existing backer plates with epoxy
Sean Burlingham -- Thursday, 20 January 2005, at 11:24 p.m.