| |
Bertram31.com General Bulletin Board
Re: Need some help from the smart guys
Posted By: Chiles In Response To: Re: Need some help from the smart guys (Walter Kaprielian)
Date: Wednesday, 12 January 2005, at 2:33 p.m.
Walter,
Thanks.
He is in Spain and we did the entire thing by e-mail. I had to give him several other pieces of information such as weight with half fuel and gear, trim tab size, line drawings of the boat and the estimated sea margin (I had to ask Captian Patrick help with that).Since I had the factory information with the 165's, he was able to take all the information and verify that his calculations were correct based upon the factory power. Then, he started re-calculating based the curves I was provided by the dyno readings from the engine manufacturer, different prop sizes for the %MCR that we agreed upon.
I'll forward you my results for the B26. It's almost 1MB. He charged me 200.00 for the consulting (I talked him down from 300. since mine was only a baby 26), and it cost me another 40.00 to have my bank wire the money.
Chiles
| |
Bertram31.com General Bulletin Board is maintained by Patrick McCrary with WebBBS 5.12.