Bertram31.com General Bulletin Board

Re: Increase shaft size from 1 3/8 to 1 1/2

Posted By: Capt. Dave Kosh
Date: Monday, 10 January 2005, at 3:56 p.m.

In Response To: Re: Increase shaft size from 1 3/8 to 1 1/2 (JK)

I did mine also with the existing struts. Had a good machine shop do the boring. Check with Patrick and Bruce on that boring as it has to be precise and most machine shops can not do this on the odd shape of a strut. So just make sure you get it done with someone who has successfully done this before. Dave K

Messages In This Thread

Increase shaft size from 1 3/8 to 1 1/2
Wayne -- Friday, 7 January 2005, at 8:05 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Tommy -- Friday, 7 January 2005, at 8:30 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
JK -- Friday, 7 January 2005, at 9:57 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Bruce -- Saturday, 8 January 2005, at 8:29 a.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Wayne -- Saturday, 8 January 2005, at 12:43 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Wayne -- Saturday, 8 January 2005, at 12:48 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Walter Kaprielian -- Saturday, 8 January 2005, at 2:51 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Wayne -- Saturday, 8 January 2005, at 5:13 p.m.

Re: Increase shaft size from 1 3/8 to 1 1/2
Capt. Dave Kosh -- Monday, 10 January 2005, at 3:56 p.m.