Bertram31.com General Bulletin Board

Re: epoxy sealer for teak before varnish

Posted By: Capt Patrick McCrary
Date: Thursday, 6 January 2005, at 6:12 a.m.

In Response To: Re: epoxy sealer for teak before varnish (Vic Roy)

UV,

50/50 might be way too weak... Just add enough alcohol to the mixed epoxy to make it real thin, maybe 15 - 25%. Apply liberally, allow it to soak in, apply more to spots that are drying out faster. After about 10 min, wipe off all excess and let it cure over night. Be sure that the temp is above 60°. It's OK to add the full second coat even if the first coat is a bit tacky.

Br,

Patrick

Messages In This Thread

epoxy sealer for teak before varnish
Vic Roy -- Wednesday, 5 January 2005, at 6:27 p.m.

Re: epoxy sealer for teak before varnish
Charlie Haws -- Wednesday, 5 January 2005, at 6:35 p.m.

Re: epoxy sealer for teak before varnish
Trey Dibrell -- Wednesday, 5 January 2005, at 7:34 p.m.

Re: epoxy sealer for teak before varnish
Capt Patrick McCrary -- Wednesday, 5 January 2005, at 8:03 p.m.

Re: epoxy sealer for teak before varnish
Vic Roy -- Wednesday, 5 January 2005, at 8:34 p.m.

Re: epoxy sealer for teak before varnish
Harv -- Wednesday, 5 January 2005, at 10:53 p.m.

Re: epoxy sealer for teak before varnish
Vic Roy -- Wednesday, 5 January 2005, at 11:22 p.m.

Re: epoxy sealer for teak before varnish
Capt Patrick McCrary -- Thursday, 6 January 2005, at 6:12 a.m.

Re: epoxy sealer for teak before varnish
Walter Kaprielian -- Thursday, 6 January 2005, at 10:26 a.m.

Re: epoxy sealer for teak before varnish
Capt Patrick McCrary -- Thursday, 6 January 2005, at 10:37 a.m.