Bertram31.com General Bulletin Board

Re: Soda Blasting, Again

Posted By: Ian Upton
Date: Monday, 20 December 2004, at 4:40 p.m.

In Response To: Re: Soda Blasting, Again (Tom Annulli)

I had my B25 sandblasted and did the barrier job myself.

I troweled on thickened epoxy to 'fill' the surface. If you do this, make sure to trowel everything off so you don't have to sand hardened epoxy / cabosil away.

The Interlux 2000 will fill minor imperfections as well.

I would highly recommend having the Interlux sprayed vs. rolling. I ended up doing both. The rolled Interlux left a good bit of texture (roller nap) that I ended up sanding smooth. The sprayed Interlux came out beautiful!

I looked into soda blasting my B20 but about fell of the chair when the quoted price was four times what I paid to have the B25 sandblasted.

Good luck,

Ian.

Messages In This Thread

Soda Blasting, Again
BillC -- Monday, 20 December 2004, at 10:02 a.m.

Re: Soda Blasting, Again
Capt Patrick McCrary -- Monday, 20 December 2004, at 10:26 a.m.

Re: Soda Blasting, Again
Capt. Dick Dean -- Monday, 20 December 2004, at 10:33 a.m.

Re: Soda Blasting, Again
mike ohlstein -- Monday, 20 December 2004, at 10:56 a.m.

Re: Soda Blasting, Again
randall -- Monday, 20 December 2004, at 12:51 p.m.

Re: Soda Blasting, Again
Garry Jordan -- Monday, 20 December 2004, at 4:23 p.m.

Re: Soda Blasting, Again
Tom Annulli -- Monday, 20 December 2004, at 11:20 a.m.

Re: Soda Blasting, Again
Ian Upton -- Monday, 20 December 2004, at 4:40 p.m.

Re: Soda Blasting, Again
Fred Haas -- Monday, 20 December 2004, at 7:54 p.m.

Re: Soda Blasting, Again
Mitch -- Monday, 20 December 2004, at 8:33 p.m.

Re: Soda Blasting, Again
Dave Rapoza -- Thursday, 27 January 2005, at 8:52 p.m.

Re: Soda Blasting, Again *LINK* *PIC*
Ken Scarboro -- Tuesday, 1 February 2005, at 12:28 p.m.