Bertram31.com General Bulletin Board

Re: Cummins with ZF trans sticking

Posted By: Capt. Dave Kosh
Date: Friday, 17 December 2004, at 11:43 a.m.

In Response To: Re: Cummins with ZF trans sticking (Vic Roy)

Also check your cable clamp by the transmission. They notoriously go bad. Always use Corrosion X and you will have no problems like this. Make sure by hand at the transmission you can mauually put it into forward or reverse . This will confirm if it is the cable or clamp or transmission. Dave K

Messages In This Thread

Cummins with ZF trans sticking
BillC -- Thursday, 16 December 2004, at 9:57 p.m.

Re: Cummins with ZF trans sticking
Ken Ching -- Friday, 17 December 2004, at 12:40 a.m.

Re: Cummins with ZF trans sticking
Vic Roy -- Friday, 17 December 2004, at 7:27 a.m.

Re: Cummins with ZF trans sticking
Capt. Dave Kosh -- Friday, 17 December 2004, at 11:43 a.m.

And the answer is...
BillC(Laura D) -- Saturday, 18 December 2004, at 6:21 p.m.

Re: Cummins with ZF trans sticking
Lynn F. -- Saturday, 18 December 2004, at 11:52 a.m.