Bertram31.com General Bulletin Board

Re: Capt Patrick--?'s and COLD

Posted By: Capt Patrick McCrary
Date: Tuesday, 14 December 2004, at 8:22 p.m.

In Response To: Capt Patrick--?'s and COLD (captdana)

Capt Dana,

All of the glass in "Buddy Boy" is 1/4" Tempered Greylite 14.

All un-laminated interior surfaces that could even remotely come in contact with water are sealed with epoxy, then primed & painted, (2 or more coats), with premium quality oil based enamel, mostly Benjamin Moore. Some of that even got a shot of primer and Imron. Safe stuff was sealed with a couple of coats of sanding sealer, then primed and oil painted. No bare wood was left, at least none that I know of...

The interior grade cabinet plywood is fine for INTERIOR work, as long as it's fully sealed & painted, or laminated. Any exterior lamination, (aft bulkhead), was laminated with epoxy rather than contact adhesive.

Best regards,

Patrick

Messages In This Thread

Interior materials advice needed
John F. -- Tuesday, 14 December 2004, at 2:29 p.m.

Re: Interior materials advice needed
Capt Patrick McCrary -- Tuesday, 14 December 2004, at 2:54 p.m.

Re: Interior materials advice needed
John F. -- Tuesday, 14 December 2004, at 3:02 p.m.

Re: Interior materials advice needed
Capt Patrick McCrary -- Tuesday, 14 December 2004, at 3:13 p.m.

Re: Interior materials advice needed
Vic Roy -- Tuesday, 14 December 2004, at 4:26 p.m.

Re: Interior materials advice needed
Ken Waters (Wild Waters) -- Tuesday, 14 December 2004, at 5:05 p.m.

Capt Patrick--?'s and COLD
captdana -- Tuesday, 14 December 2004, at 7:35 p.m.

Re: Capt Patrick--?'s and COLD
Capt Patrick McCrary -- Tuesday, 14 December 2004, at 8:22 p.m.

Re: Capt Patrick--?'s and COLD
John F. -- Wednesday, 15 December 2004, at 11:47 a.m.

Re: Interior materials advice needed
BillC -- Wednesday, 15 December 2004, at 9:02 a.m.