Bertram31.com General Bulletin Board

Re: Interior materials advice needed

Posted By: Capt Patrick McCrary
Date: Tuesday, 14 December 2004, at 3:13 p.m.

In Response To: Re: Interior materials advice needed (John F.)

John,

Basically you'll laminate the whole sheet of plywood before making even the first cut. Much easier than laminating a bunch of parts. The laminate comes sized larger than a standard sheet of ply, & is trimmed after glueing it down with a router and laminate bit.

The overall process is something books are filled with... You should be able to buy a DIY book on laminating from some place like Home Depot. The glue you'll use is contact adhesive. There are tricks to it and your jointery needs to be very accurate for cabinetry.

Best regards,

Patrick

Messages In This Thread

Interior materials advice needed
John F. -- Tuesday, 14 December 2004, at 2:29 p.m.

Re: Interior materials advice needed
Capt Patrick McCrary -- Tuesday, 14 December 2004, at 2:54 p.m.

Re: Interior materials advice needed
John F. -- Tuesday, 14 December 2004, at 3:02 p.m.

Re: Interior materials advice needed
Capt Patrick McCrary -- Tuesday, 14 December 2004, at 3:13 p.m.

Re: Interior materials advice needed
Vic Roy -- Tuesday, 14 December 2004, at 4:26 p.m.

Re: Interior materials advice needed
Ken Waters (Wild Waters) -- Tuesday, 14 December 2004, at 5:05 p.m.

Capt Patrick--?'s and COLD
captdana -- Tuesday, 14 December 2004, at 7:35 p.m.

Re: Capt Patrick--?'s and COLD
Capt Patrick McCrary -- Tuesday, 14 December 2004, at 8:22 p.m.

Re: Capt Patrick--?'s and COLD
John F. -- Wednesday, 15 December 2004, at 11:47 a.m.

Re: Interior materials advice needed
BillC -- Wednesday, 15 December 2004, at 9:02 a.m.