Bertram31.com General Bulletin Board

Re: Alum. Block/Head Diesel

Posted By: Jim Kilbane
Date: Monday, 13 December 2004, at 7:35 p.m.

In Response To: Re: Alum. Block/Head Diesel (ZeroCavity)

The cost (and this is a ruff #) is between 15 & 20. As far a space the engine is only 28" long so it will hardly stick beyond the aft deck. The width is around 29" so not much if any narrower then a v block. Unless the faithful talk me out of it I'm thinking this is the route I'm going to take.
Not to change the subject but do you want a swim platform? Check out www.beachfiber.com I contacted them and they will build platform for 1,100. I will have to fabricate the mounting hardware. Let me know if you want one. I'm going to order 2 for myself.

Messages In This Thread

Alum. Block/Head Diesel
Jim Kilbane -- Monday, 13 December 2004, at 6:22 p.m.

Re: Alum. Block/Head Diesel
ZeroCavity -- Monday, 13 December 2004, at 6:38 p.m.

Re: Alum. Block/Head Diesel
Jim Kilbane -- Monday, 13 December 2004, at 7:35 p.m.

Re: Alum. Block/Head Diesel
Bruce -- Monday, 13 December 2004, at 7:31 p.m.

Re: Alum. Block/Head Diesel
bruce -- Monday, 13 December 2004, at 9:08 p.m.

Re: Alum. Block/Head Diesel
Vic Roy -- Monday, 13 December 2004, at 9:13 p.m.

Re: Alum. Block/Head Diesel
Capt. Dave Kosh -- Tuesday, 14 December 2004, at 9:45 a.m.