Bertram31.com General Bulletin Board

Re: Outrigger re-assembly

Posted By: Vic Roy
Date: Tuesday, 7 December 2004, at 5:19 p.m.

In Response To: Re: Outrigger re-assembly (Capt. Dave Kosh)

Capt. Dave - take some Gulf charcoal lighter on a rag and wipe it off, then come right behind it with some Dawn and water solution on antoher rag. Sure, the Gulf is mineral spirts, but it won't be on there long enough to hurt it. If the first application does not get it all, do it agian, but confine your area of wipe down to where it's necessary. Might want to mask off your area with some blue 3M tape to remind you where you need to wipe.

Now the issue of using Tef Gel on plastic zippers is another story. Don't, on nylon zippers or even on Delfin ones. Metal zipper teeth may be ok. On plastic use Zippy-Fast or just plain ole parafin wax.

UV

Messages In This Thread

Outrigger re-assembly
Dug -- Tuesday, 7 December 2004, at 2:22 p.m.

Re: Outrigger re-assembly
Vic Roy -- Tuesday, 7 December 2004, at 2:29 p.m.

Re: Outrigger re-assembly
cwj -- Tuesday, 7 December 2004, at 3:02 p.m.

Re: Outrigger re-assembly
Vic Roy -- Tuesday, 7 December 2004, at 3:41 p.m.

Re: Outrigger re-assembly
Walter Kaprielian -- Tuesday, 7 December 2004, at 4:31 p.m.

Re: Outrigger re-assembly
Capt. Dave Kosh -- Tuesday, 7 December 2004, at 4:40 p.m.

Re: Outrigger re-assembly
Vic Roy -- Tuesday, 7 December 2004, at 5:19 p.m.

Re: Outrigger re-assembly
Capt. Dave Kosh -- Tuesday, 7 December 2004, at 6:13 p.m.

Re: Outrigger re-assembly
Vic Roy -- Tuesday, 7 December 2004, at 6:23 p.m.

Re: Outrigger re-assembly
cwj -- Tuesday, 7 December 2004, at 8:20 p.m.