Bertram31.com General Bulletin Board

Re: West, MAS, System Three Epoxy ?

Posted By: John F.
Date: Tuesday, 19 October 2004, at 10:13 a.m.

In Response To: Re: West, MAS, System Three Epoxy ? (Joef)

I've used the MAS and West. Both worked well with no problems. When comparing them $$, be sure to include the cost of hardener and consider the mix ratio, so that you're comparing total volume of your mixed product. As I remember, West is 5-1, and MAS is maybe 2-1. The advantage with MAS was that it was supposed to develop less/no blush when cured, making the application of a second coat over a cured first coat a little easier. I've also used Interlux epoxy, and it worked fine also.

That being said, I pretty much always use West out of habit, and never use the pumps. Get measuring cups.

Messages In This Thread

West, MAS, System Three Epoxy ?
Bill -- Tuesday, 19 October 2004, at 8:14 a.m.

Re: West, MAS, System Three Epoxy ?
Joef -- Tuesday, 19 October 2004, at 9:59 a.m.

Re: West, MAS, System Three Epoxy ?
John F. -- Tuesday, 19 October 2004, at 10:13 a.m.

Re: West, MAS, System Three Epoxy ?
Harv -- Tuesday, 19 October 2004, at 12:46 p.m.

Re: West, MAS, System Three Epoxy ?
Gary Gibson -- Tuesday, 19 October 2004, at 1:38 p.m.

Re: West, MAS, System Three Epoxy ?
Capt. Dave Kosh -- Tuesday, 19 October 2004, at 3:20 p.m.

Re: West, MAS, System Three Epoxy ?
Marty Loken -- Tuesday, 19 October 2004, at 7:28 p.m.

Re: West, MAS, System Three Epoxy ?
Rich H -- Wednesday, 20 October 2004, at 8:11 a.m.